FG Formular 1 Competition 2019

$2,450.00
In stock
SKU
10008

FG Formular 1 Competition

This model is fitted with numerous aluminium parts: front and rear side bulkheads, rockers, engine mount, suspension arm ends...
Steel made Uniball sockets all possible enable all adjustments of the front and rear suspensions.
The transmission made with a gearwheell drive offers outstanding reliability and smooth operation.

Just like all other FG Competition models the FG Formula 1 Competition is the most successful model of the past years. The experiences we gained from numerous competitions have all influenced this version. The FG gearwheel drive which is extremely smooth running and cares for more power reserves. Surely FG Modellsport has created a competitive model for the next years with this version which will seamlessly follow up on the past successes.

Highlights

  • Alloy wishbones
  • FG viscous differential
  • FG gearwheel drive
  • Alloy rear axle plate
  • FG alloy shock absorbers 04
  • Ball-bearing alloy servo saver
  • 26 ccm Zenoah-Engine
  • Airbox
  • Tuned pipe
  • Front- and rear brake
  • 5 mm Chassis
  • Lexan body shell

Technical description of the FG Formula 1 Competition kit:


The undercarriage of the FG Formula 1 Competition is built on an 5mm alloy chassis. Chassis cut-outs and the lateral carbon fiber parts cause a weight reduction. All screws at the bottom of the chassis are countersunk.

Front and rear axle mounts as well as the engine unit are connected over the complete length of the chassis, therefore we achieved almost the stiffness of a monocoque chassis. The quick fix system of the engine makes a fast changing of the engine possible. The drive to the rear axle is carried out over several easy-running front gearwheels and an FG ball drive at the rear axle. A separate flange bearing holds the clutch bell in order to relieve the crankshaft. Front and rear axle with their various adjusting possibilities as king pin angle, castor a.s.o. consist of alloy delta wishbones below. Solid alloy rear axle plates reduce the wear at the rear axle and give an enormous driving stability. The rear axle is equipped with the FG viscous locking differential. 4 oil-pressure shock absorbers controlled by a pushrod suspension as well as stabilizers guarantee an optimal ground contact.

We deliver the chassis selectively with tuning bowden cable brakes for front or respectively rear axle. The model is powered by a high-capacity 26 cm³ engine with airbox and Tuning pipe.

Equipment of the FG Formula 1 Competition kit


CNC-cut 5mm alloy chassis with lateral carbon fiber inserts, 26 cm³ engine, inlet silencer, Tuning pipe, viscous locking differential, FG gearwheel drive, ball drive, complete rear and front axle carrier unit with integrated engine quick-fixing device, double alloy wishbone fastenings, lower alloy delta wishbones at front and rear axle, front and rear alloy uprights, ball-bearing servo saver, steering stops, pushrods, 4 oil-pressure shock absorbers with alloy damper pistons, mechanical Tuning brakes at front and rear, stabilizer for front and rear axle, 10mm alloy balls, rear spoiler, polycarbonate body shell, polyamide front spoiler, receiver box, competition tires with tire inserts.

We deliver the models as a kit including mounting instruction. The body parts are made of clear polycarbonate for your own painting. FG stickers and writings are enclosed.


These parts are not included and must be supplied or ordered separately when the rc installation option is selected!


This model is fitted with numerous aluminium parts : front and rear side bulkheads, rockers, engine mount, suspension arm ends...
Steel made Uniball sockets all possible enable all adjustments of the front and rear suspensions.
The transmission made with a gearwheell drive offers outstanding reliability and smooth operation.

• Zenoah 26cc engine
• Clear bodyshell and polycarbonate spoiler
• Mechanical brakes

Not included :
• RC system 2.4GHz
• Steering and throttle servos
• Batteries and charger

Dimensions :
• Length : 960mm
• Width : 440mm
• Height : 230mm
• Wheelbase : 620mm

RC competition car F1 with clear body, Zenoah 26cc, mecha. Brakes

Write Your Own Review
Write a ReviewFG Formular 1 Competition 2019
To Top